Ramset 50 GB gate opener kit
| Ram 50 GB gate Openers kit 1 Include: - Ram 50 GB 1/2 HP gate operator
- Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
- Two Mini-Remote Control model 433 MHz 2-Button
| | Ram 50 GB gate Openers kit 2 Include: - Ram 50 GB 1/2 HP gate operator
- Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
- Two Mini-Remote Control model 433 MHz 2-Button
- BFT Photo Cell / Photo Eye with Reflector
|
| Ram 50 GB gate Openers kit 3 Include: - Ram 50 GB 1/2 HP gate operator
- Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below )
- Two Mini-Remote Control model 433 MHz 2-Button
- BFT Photo Cell / Photo Eye with Reflector
- EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft
| | Ram 50 GB gate Openers kit 4 Include: - Ram 50 GB 1/2 HP gate operator
- Receiver 300/310 Dip Switch ((COMPATIBILITY Multi-code® 300 MHz))
- Two Chamberlain Remote Control model 300MC 1-Button
- BFT Photo Cell / Photo Eye with Reflector
- EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft
- Wireless keypad RADIOKEYD 433 MHz
|
RAM 50 GB Gate Opener
This affordable gate opener features a direct-drive 1/2 horsepower motor, handling gates up to 700 lbs. The RAM 50 GB is highly recommended for single home use for both aesthetics and its high performace. It is extremely low maintenance and is powered by our intelligate board which offers a veriety of functions to secure your home and make your daily life a bit easier.
Features:
Left / Right hand Switch Adjustment
3-Wire Master/Slave Synchronization Cable
Plug-in Loop Detector (ILD-24s)Capability
Relay Connection
Service Push Buttons.
One pass, ERD Sensitivity Adjustments
Anti-tailgating. While the gate is opening, after a safety device is detected and cleared, the gate will immediately close whether or not the limit has been reached. When the gate is closing, if a safety is etected the gate will stop but not reverse it self.
Automatic Timer
Automatically closes the gate after all safety devices are clear. (0-60 seconds)
3-Wire Master/Slave Synchronization Cable
RS485 3-wire cable allows two operators to run together in a master/slave configuration
Plug-in Loop Detector (ILD-24s) Capability
Eliminates wire mess and allows for a clean, easy, well organized installation.
Pre-warn & Constant Warn
Adds a 3 second delay before the gate moves in any direction. During this 3 second delay a siren, buzzer or light can be added to activate.
Allows an alarm or light (not included) to activate while the gate is in motion.
Secure Close
This automatically closes the gate after power is lost and regained whether or not the gate is on a limit.
Open & Close Delay
Adds a 1 second delay on either the open or close cycle.
Relay Connection & Service Push Buttons
Relay outputs that will light a lamp or sound a buzzer/alarm when the gate is not closed, moving or before the gate moves. Service pushbuttons allow the technician to have complete control of the gate when adjusting the operator.
Radio Cycle
Gives the user complete control of the gate. The gate can be opened with the 1st command, stopped with the 2nd command and closed with the 3rd command.
Ramset Intelligate Control Board
• Automatic Timer
• One pass, ERD sensitivity adjustments
• Left/Right hand switch adjustment
• Plug-in loop detector (ILD-24s) capability
• 3-Wire Master/Slave synchronization cable
• Pre-warn & constant warn
• Secure close
• Open & close delay
• Relay connection & service push buttons
• Radio cycle