The MCS109950 and the MCS302850 are two auto sensing Multi-Code or Stanley compatible format gate receivers. They eliminate any chance of damage to either the gate operator or themselves from running off the wrong voltage. Nearly all gate orperators offer either 24 or 12 volts AC or DC as accessory power. Because these two receivers are auto sensing, each recognizes the gate operator's correct voltage. As a result, installers can be assured of always having the correct model gate receiver on the truck.
Multi-Code 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
ManualSpec Sheet
Multi-Code 109950: 1-Channel 12-24V Gate Receiver
The Model Multi-Code 109950 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 106603 Remote Whip Antenna can also be used with this receiver.
The Model Multi-Code 109950 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model Multi-Code 109950 is compatible with Multi-Code and Stanley transmitters only.
Features
Operates on 12-24 volts AC or DC power
One channel
Whip antenna
3-foot antenna coax and bulkhead connector
1,024 codes
RF frequency: 300 MHz or 310 MHz (jumper selectable)
3.625" W x 5.25" H x 1.5" D
Order number: MCS109950