Ramset 300 residential gate openers kits

	Ram 300 residential gate Openers kit 1 Include: Ram 300 gate operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button		Ram 300 residential gate Openers kit 2 Include: Ram 300 gate operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button BFT Photo Cell / Photo Eye with Reflector
	Ram 300 residential gate Openers kit 3 Include: Ram 300 gate operator Receiver 433 MHz range of up to 150 feet ( up to 1500 feet add antenna shown below ) Two Mini-Remote Control model 433 MHz 2-Button BFT Photo Cell / Photo Eye with Reflector  EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft		Ram 300 residential gate Openers kit 4 Include: Ram 300 gate operator Receiver 300/310 Dip Switch ((COMPATIBILITY Multi-code® 300 MHz)) Two Chamberlain Remote Control model 300MC 1-Button BFT Photo Cell / Photo Eye with Reflector  EMX CarSense 202 Slim Outdoor Buried Driveway Sensor 50ft Wireless keypad RADIOKEYD  433 MHz

Ramset Ram-300 Swing Gate Operator

This is our best selling swing gate operator, for both residential and commercial applications. The RAM 300 features a powerful 1/2 horsepower, continuous duty motor, able to swing gates up to 18 feet in length and 800 pounds. This efficiently designed and durable system comes equipped with the foot pedal release safety system, for easy manual opening and closing of the gate during power outages and emergencies. It also includes out Whisper Quiet motor operation.

Specifications:

MAXIMUM GATE WEIGHT: 800lbs
MAXIMUM GATE LENGTH: 18 feet
GATE TRAVELING SPEED: Approximately 6.4 inches per second
CYCLES: Continuous
UNIT WEIGHT: 110 pounds
OPERATING TEMPERATURES: -10º to 160º

Features:

Electric Motor: 1/2 horsepower, 120 VAC 4.5 ampere 50 - 60Hertz, continuous duty with high speed ball bearings and resettable overload button
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation.
Limit Switches: Mechanical adjustment for accurate gate stop settings.
Cover: High-impact resistant charcoal grey polyethylene.
Finish: Gold/Zinc plated to inhibit corrosion.
Cover Dimensions: H: 27" L: 16.5" W: 20"

Foot Pedal Release
Emergency Release: This mechanism disengages the gate from the operator to allow easy manual opening and closing of the gate duting power outages and emergencies.

Electronic Features

Intelligate Control Board:

Ramset's "Intelligate" control board works with all of Ramset's slide, swing and overhead vehicular gate operators. It is controlled by a programmable microprocessor that reads and precisely executes all functions of the control board. The control board is powered by a separate mounted 24VAC transformer. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.

The "Intelligate" features:
• Reprogrammable microprocessor: Allows control boards to be updated.
• LED diagnostics: LED (red lights) show the status of the control board at all times.
• 3-Button station: Easy connection plug (included) for 3-button stations.
• Status relays: Triggers relays when the gate is fully open or fully closed.
• Plug-in loop detectors: Allows ILD-24 plug-in loop detectors (sold separately) to be used, eliminating messy wire connections.
• The control board is powered by a 24VAC transformer that is INCLUDED. This allows no necessary board modifications between 110VAC and 220VAC single-phase applications.

• The "Intelligates" functions include:

• Automatic close timer: Automatically closes the gate after 0 - 60 seconds after the gate fully opens and all of the safety devices are cleared.
• Pre warning: Adds a 3 second delay before the gate moves in any direction. During this 3 second delay the PREWARN relay maintains a closed contact. This allows an alarm or light to be connected to warn when the gate is about to move.
• Constant warning: Triggers the PREWARN relay to maintain a closed contact while gate is in motions. This allows an alarm or light to be connected to show when the gate is moving.
• Secure close: When power is lost, then regained, the control board checks the status of the gate. If the gate is open and the safety devices are cleared, the gate will automatically close.
• Radio cycle: Allows the gate to be stopped at any time with the remote control. Then reverse with another command.
• One pass: Closes the gate immediately after the safety devices are cleared. If another car triggers a safety device the gate will stop but not open until a valid open signal is received.
• Open & close delay: Adds a 1 second delay before the gate opens and/or closes.
• Left or Right: With a flip of a switch, the logic of the control board changes from a left hand operation to a right hand operation.
• Master/Slave: Synchronizes two gates to work together in a bi-parting installation.
• ERD (Electronic Reversing Devices): Automatically adjusts the sensitivity of the operator to the size of the gate.

 

Ram 300 Gate Openers > Ram 300